#1000 White Ceramic Fortified Acrylic Roof Coating

DESCRIPTION

Sealmark #1000 Roof Coating is a water based multiple blend of acrylic resins, fortified with space age ceramic particles.  This unique chemistry allows for the application over a wide variety of substrates and surfaces.  These include but are not limited to: wood, steel, aluminum, concrete, gypsum board, asphalt, EPDM, and urethane foam.

USES

Sealmark #1000 is used to decorate and provide a waterproof energy efficient coating on a variety of roof and wall substrates for industrial, commercial, and residential buildings.

COVERAGE

The coverage rates for Sealmark #1000 will vary depending on the application roof substrate being used.  Please consult the roof application specifications in the manual for the recommended coverage rates.

PROPERTIES

Sealmark #1000 is a unique blend of acrylic resins and ceramic particles.  It reflects and refracts the sun’s energy to help lower the building interior temperature.  Sealmark’s roof coating also shows excellent resistance to commonly found industrial pollutants, salt water, and ponding water areas, commonly found on roofs.

DRYING TIME

After application the drying time of Sealmark #1000 is dependent on the ambient air temperature and relative humidity.  Under normal conditions (75° and 55% relative humidity) the acceptable drying time for system continuation is approximately 24 hours.  Under normal conditions protect from rain and harmful environmental conditions for a period of at least 24 hours.  Sealmark #1000 Roof Coating is waterproof. Cool and damp conditions will require additional drying time

APPLICATION PROCEDURES

Consult the roof specifications in this manual for specific roof applications.

CLEAN UP

Use soap and water for clean up.  System materials are water-borne and are non-toxic.  Prior to
curing, system materials are water soluble.  Clean up any spills, over spray, or residue of the system materials before they have time to set.  Cured or dried system materials are not water soluble and may prove to be difficult to impossible to remove without damage to substrate or other materials upon which they have dried.  Dispose of waste materials and empty containers into an approved waste disposal facility.  Never dump materials into storm or sanitary sewers, nor into bodies of water.

 

CAUTIONS
As with any type of application, take the appropriate steps necessary to ensure that clean up of #1000 is achieved with minimal effort.  This means properly tarp/secure application area as to prevent unintended application as product may prove to be difficult to remove.  SOME ROOF SUBSTRATES MAY HAVE BEEN COATED WITH A CLEAR SILICON CAULKING THAT WOULD ADVERSELY AFFECT THE ADHESION OF SEALMARK PRODUCTS.  IF APPLICATION OF THE SILICON TREATMENT IS UNKNOWN; IT IS RECOMMENDED THAT A TEST APPLICATION BE APPLIED TO THE FOOF SUBSTRATE AND CHECKED AFTER CURING FOR ADHESION.

 

(TECHNICAL AND JOB SITE ASSISTANCE AVAILABLE UPON REQUEST)

 

Click here to download the Material Safety Data Sheet (MSDS) for this product.